UNLIMITED CLASS RULES
Brought to you by Finish Line Productions
Mark "Doc" Davis
And
James "Bud" Smith
Drivers! Click here to print the registration form!
All participants are responsible for reading and understanding these rules. If ANY area is unclear, it's the participants' responsibility to contact race officials for clarification.
- Click below to print rules.
Body
- 1. Must be a full size or mid size truck or SUV style body.
- 2. Body and frame may be from different manufacturers.
- 3. Must have a complete body. Body may be modified, but still must retain all panels.
- Exception: Tailgates can be removed.
- 4. Full fiberglass bodies allowed.
- 5. Fenders and rear quarter panels may be radius for larger tires. No more than 5" of material allowed to be removed from OEM panels. Aftermarket bodies will be allowed whatever radius that they came from the factory with.
- 6. All headlights, tail lights, mirrors and misc. plastic parts must be removed.
- 7. Drivers compartment must be properly sealed from outside conditions.
- Example: No open gaps between bottom of door to the rocker panel. No large holes or gaps in floor boards.
- 8. Must have tow hooks or tow chains. Hooks and chains must be mounted securely to vehicle's frame. Hooks and chains must be visible and easy to access.
- 9. All cars must have numbers on both doors and roof. Door numbers must be a minimum of 22" tall and 3" wide. Roof numbers must be a minimum of 24" tall and 3" wide. Bottom of roof number must point towards passenger side.
- 10. Numbers must be a contrasting color from car. No reflective martial can be used for car numbers.
- 11. No vulgar language or images will be allowed on vehicle.
- 12. All glass must be removed from vehicle.
Interior
- 1. All carpet, door panels, extra seats and glass must be removed from vehicle if using an OEM style cab.
- 2. Ok to remove dash and dash structure.
- 3. All airbags must be removed.
- 4. One seat only. May be mounted on left side or center of cab.
- 5. Seat must be any aftermarket race seat or suspension seat.
- 6. No loose objects allowed in driver compartment.
- 7. All parts of the vehicle's fuel system (pump, tank and lines) must be located outside of the driver compartment.
Frame/Suspension/Steering/Brakes/Weighting
- 1. Vehicle may be 2wd or 4x4.
- 2. Vehicles main frame must be an OEM full frame. No tube main frames allowed.
- 3. Frame may be from any OEM automotive company.
- 4. Frame may be boxed.
- 5. Any OEM type suspension components allowed. This applies only to the axle assemblies.
- 6. Shocks may be mounted in any location on frame as long as they are not a safety issue.
- 7. Shock mounts may be reinforced or redesigned.
- Example: OK to install shock hoops.
- 8. Long travel and remote reservoir type shocks OK.
- 9. Aftermarket coil over shocks allowed. Maximum of one reservoir per shock.
- 10. Suspension Lift kits allowed. Maximum allowed is 4".
- 11. No body lifts allowed.
- 12. Must have a minimum of 18" of ground clearance from bottom of lowest point on frame.
- 13. All front and rear axle assemblies must be an OEM style. No aftermarket housings allowed.
- 14. Aftermarket axle shafts ok.
- 15. OK to add axle trusses.
- 16. A arms may be stock or aftermarket long travel type.
- 17. No limit on suspension travel.
- 18. May run steering box or rack & pinion style steering.
- 19. No hydraulic steering allowed.
- 20. Aftermarket steering dampeners OK.
- 21. Steering quickeners allowed.
- 22. Brakes may be OEM or aftermarket.
- 23. Brake must lock up all 4 wheels under hard braking.
- 24. Weighting allowed only over center line of rear axle. Weights must be mounted within frame width. All weights must be securely mounted to frame or bed. All weights will be inspected.
Roll Cage
- 1. All vehicles must have a minimum of a 4 point style roll cage. (see illustration below)
- 2. Ok to have Arena, CORR, or Baja style cages.
- 3. No exterior roll cages allowed.
- 4. Roll bars and hoops must be built from a minimum of a 1 ½ round type tubing and .095 thickness.
- 5. Each corner of cage at frame or floor contact point must have a floor plate 4x4x1/8" and have at least 2, 2"x2"x1/8 gusset. HIGHLY RECOMMEND having same style gussets at all tubing junctions.
- 6. Floor plate must be bolted to floor board, or directly welded to frame.
- 7. All tubing must be bent when changing angle. No cutting and notching to make a curve.
- 8. All roll cages will be inspected for safety and proper construction.
Bumpers
- 1. All vehicles must have a front bumper and rear bumper.
- 2. Bumpers may be stock, aftermarket, or home built.
- 3. All home built bumpers will be inspected.
- 4. Baja or arena type bumpers OK.
- 5. May attach tow hooks or tow chains to bumpers. All tow hooks and tow chains will be inspected.
- 6. Bumpers may be welded or bolted to frame. All bumper mounting will be inspected.
Engine/Transmission
- 1. Any OEM automotive style engine.
- 2. Engine may be a gas or diesel.
- 3. No limit on engine size.
- 4. Aftermarket intakes ok.
- 5. Aftermarket performance heads or blocks allowed.
- 6. Aftermarket camshafts ok.
- 7. Any automotive style transmission allowed.
- 8. Transmission may be a manual or automatic type.
- 9. All transmissions must have minimum of 1 forward gear, reverse gear, and neutral.
Induction & Fuel Systems
- 1. Aftermarket Intakes OK.
- 2. One carburetor only. Max size of 850 CFM.
- 3. Any EFI system allowed.
- 4. May run aftermarket air intake systems.
- 5. K&N type filters OK.
- 6. No NOS allowed.
- 7. No super charges allowed.
- 8. Turbo allowed only if your engine originally came from manufacturer with one.
- 9. Pump gas only. Aviation fuel Ok. No fuel additives.
- 10. Must have automotive style racing fuel cell.
- 11. Fuel tank may be moved to back of vehicle. Must be mounted above frame, behind or forward of rear axle.
- 12. Fuel tank must be mounted with a minimum of 2 steel straps.
- 13. Fuel cells must have roll over valve.
Exhaust
- 1. Headers OK.
- 2. Exhaust must exit under vehicle and behind driver.
- 3. OK to remove catalytic converters.
- 4. Exhaust must be mounted securely.
Wheels & Tires
- 1. Maximum tire size of 36". Measurement will be based on manufacturer's imprint on side of tire.
- 2. Tire must be DOT approved MT or AT tire. No studded tires will be allowed.
- 3. Tire tread can not be altered. Exception: Tire sipping OK.
- 4. Wheels must be DOT approved.
- 5. Bead lock wheels allowed.
Cooling
- 1. One radiator only. May be mounted behind cab or back section of SUV cab. Must be shielded from driver.
- 2. Replacing mechanical fan for electric fan OK.
- 3. May run mechanical or electric water pump.
- 4. Must run straight water only. No additives allowed.
- 5. Must have overflow bottle. Bottle must be in good shape and not leak.
Electrical & Ignition
- 1. May run any style ignition system. No magnetos allowed.
- 2. May run aftermarket coils, wires, spark plugs, and distributors.
- 3. Must have master kill switch. Switch should be mounted in easy reach of driver.
- 4. Must run battery. Battery must be enclosed in a boat or race car type box.
- 5. Battery may be mounted in the cab, bed or under the hood.
- 6. Battery must be secured by metal hold downs. No ratchet straps or bungee cords allowed.
Safety
- 1. All drivers must wear a helmet.
- 2. Helmet must be a full face or motor cross style.
- 3. Helmet must be in good shape with no signs of damage. RECOMMENED TO HAVE 2005 OR BETTER DOT RATED HELMET.
- 4. Must have motorcycle/snowmobile goggles or face shield with helmet. Sunglass or safety glass not allowed.
- 5. Must have full fire suit. No military flight suits allowed. Suit must meet SFI specs.
- 6. Must have full boots. Recommend to have SFI spec boots.
- 7. All vehicles must have a minimum of a 2 ½ pound fire extinguisher within easy grasp of driver.
- 8. Must run 5 point style race harness. Belts older then 2 years Ok.
- 9. Must have window net on driver's door. Net must be an approved automotive racing style.
- 10. Seat may be stock or an aftermarket suspension seat.
- 11. All seat belts must be in good shape. All seat belts will be inspected for damage and for proper installation.
- 12. Highly recommended to have a neck brace.
Last updated on May 30, 2011